SurfaceWorks Pricing Guide September 2025
ORIGINAL LINES SURFACEWORKS PRICING GUIDE
DREW TABLE SPECIFICATIONS
Footrests, Top Material, Edge Profiles
Drew Tables are available with or without footrests as per the following size configurations:
Footrests
No Footrest
Table Depth
Depths: 24, 30 & 36 Widths: 72 & under
Footrests
24"
30"
36"
42"
48"
No Footrest *
•
•
•
Single Footrest
•
•
•
Single Footrest
Dual Footrests
•
•
MODEL NUMBER
SP-DR-2
Depths: 24, 30 & 36 Widths: All
* Up to 72” width only
AP
Dual Footrests
Depths: 42 & 48 Widths: All
Top Models AB, EB, EB9, MA7: 1.2" overall thickness, constructed with high pressure laminate, particle board core, edged with urethane or edgeband and backed with phenolic to form a completely sealed outside surface. Top Model MA7-S: 1.2" overall thickness, constructed with 20 gauge brushed stainless steel, particle board core, edged with urethane and backed with phenolic to form a completely sealed outside surface. Top Model SB1: 1.5" overall thickness, constructed with solid Maple Butcherblock. Top Model HC1: constructed with 1.0" thick TopLab®PLUS Solid Phenolic Resin Panel
Top Material & Construction:
Top Models: AB, EB, EB9
Top Models: MA7, MA7-S
Top Model: SB1
Top Model: HC1
Standard Drew Table Edge Profiles are as follows:
Edge Profiles
Edgeband:
Top Models: AB, EB, EB9 Edgeband
Top Models: MA7 & MA7-S Eased Profile Urethane Edge
Top Model AB: 2mm ABS Top Model EB: 2mm or 3mm ABS or PVC Top Model EB9: 2mm Premium 3D PVC
1.2"
1.2"
Urethane Edge: Top Models MA7 & MA7-S: 0.75" x 1.2" Eased Profile
2mm or 3mm
0.75"
Solid Wood Butcherblock:
Top Model SB1: 1.5" Eased Profile
Top Model: SB1 Solid Wood Butcherblock
Top Model: HC1 TopLab®PLUS Phenolic
TopLab®PLUS Phenolic:
Top Model HC1: 1.0" Eased Profile
1.0"
1.5"
SurfaceWorks is happy to accommodate your special requests; please inquire if your needs differ from what is found in our standard offering.
209
Made with FlippingBook Digital Publishing Software