SurfaceWorks Pricing Guide September 2026
DREW PERFORMANCE TABLE SPECIFICATIONS Footrests, Top Material, Edge Profiles
SURFACEWORKS PRICING GUIDE
Drew Tables are available with or without footrests as per the following size configurations:
Footrests
No Footrest
Table Depth
Depths: 24, 30 & 36 Widths: 72 & under
24"
30"
36"
42"
48"
Footrests
•
•
•
No Footrest *
•
•
•
Single Footrest
Single Footrest
• • * Up to 72” width only
Dual Footrests
Depths: 24, 30 & 36 Widths: All
Dual Footrests
Depths: 42 & 48 Widths: All
Top Models AB, EB, MA7: 1.2" overall thickness, constructed with high-pres sure laminate, particle board core, edged with urethane or edgeband and backed with phenolic to form a completely sealed outside surface. Top Model MA7-S: 1.2" overall thickness, constructed with 20 gauge brushed stainless steel, particle board core, edged with urethane and backed with phenolic to form a completely sealed outside surface. Top Model SB1: 1.5" overall thickness, constructed with solid Maple Butch erblock. Top Model HC1: constructed with 1.0" thick TopLab®PLUS Solid Phenolic Resin Panel
Top Material & Construction
Top Models: MA7, MA7-S
Top Models: AB, EB
Top Model: HC1
Top Model: SB1
Standard Drew Table Edge Profiles are as follows:
Edge Profiles
Edgeband:
Top Models: AB, EB Edgeband
Top Models: MA7 & MA7-S Eased Profile Urethane Edge
Top Model AB: 2mm ABS Top Model EB: 2mm or 3mm ABS or PVC
Urethane Edge:
1.2"
1.2"
Top Models MA7 & MA7-S: 0.75" x 1.2" Eased Profile
Solid Wood Butcherblock:
0.75"
2mm or 3mm
Top Model SB1: 1.5" Eased Profile
Top Model: SB1 Solid Wood Butcherblock
Top Model: HC1 TopLab®PLUS Phenolic
TopLab®PLUS Phenolic:
Top Model HC1: 1.0" Eased Profile
1.0"
1.5"
205
Made with FlippingBook. PDF to flipbook with ease