SurfaceWorks Pricing Guide September 2026

TRAINING TABLE TOPS HOW TO ORDER Overview, Model Number, Finishes, Options, Accessories

SURFACEWORKS PRICING GUIDE

Model Number Example: Colors & Finishes Top Edge Treatment Overview Training Table Tops are available in the same sizes and shapes as most of our Training Tables with the same avail able options. Edge selection includes "F-Series" & "Y-Se ries" urethane edges which feature urethane profile on the user side and flat profile edgeband (F-Series) or urethane (Y-Series) on non-user sides to allow for ease of connect ing and adjacent placement. Model Number Example: TBR.R.2472 Colors & Finishes Top Edge Treatment Standard Edge Treatment . . . . . . . . .see pricing pages Other Edge Treatment . . . . . . . . . . . . . . quote required Top Edge Finish Standard Edge Color . . . . . . . . . . . . . . . . . . . . . . . . . std Non-Standard Edge Color . . . . . . . . . . . quote required Top Surface Finish Group 1 Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . std Group 2 Laminate . . . . . . . . . . . . . . . .see pricing pages FENIX® Super Matte Laminate . . . . . . . quote required Forbo Funiture Linoleum . . . . . . . . . . . .quote required Other Laminate/Material . . . . . . . . . . . .quote required Stiffeners Stiffeners are recommended to minimize sagging on Tops that have unsupported spans of 45" to 60", once installed. The maximum unsupported span should not exceed 60". Optimal stiffener placement is in the center, directly between the base plates (or other supports), however, it can be placed up to 6” off the center. If the stiffener must be placed fur ther off center, it is recommended to install two stiffeners, placed parallel. If the top depth is 36" or greater, two par allel stiffeners are recommended. Stiffeners are accessories to be ordered separately and field installed. Screws are included. Standard Edge Treatment . . . . . . . . .see pricing pages Other Edge Treatment . . . . . . . . . . . . . . quote required Top Edge Finish Standard Edge Color . . . . . . . . . . . . . . . . . . . . . . . . . std Non-Standard Edge Color . . . . . . . . . . . quote required Top Surface Finish Group 1 Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . std Group 2 Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . std FENIX® Super Matte Laminate . . . . . . . quote required Forbo Funiture Linoleum . . . . . . . . . . . .quote required Other Laminate/Material . . . . . . . . . . . .quote required

Power/Data Option: Nacre Featured (default) power/data option includes one 3.5" x 7.25" Nacre pop-up unit with two power, one USB A+C charging and one open data. Nacre is equipped with a 10' cord with a straight plug. Available colors include 004 Folkstone, 300 Black, and 699 White. Standard placement is centered along the back edge.

Table Connector Option: Pop N Lock Featured (default) table connector option is Pop N Lock, installed, one kit per table, with standard placement as shown below. Table Connectors are not recommended for use with height-adjustable Training Tables.

Pop N Lock Connector Kit

Nacre Power/Data Unit

Open Data

Power

USB A+C

Pop N Lock Standard Placement: one kit per top, as shown:

Nacre Power/Data Standard Placement

Nacre Power

Rectangle

Half-Round

Pricing TC1 Pop N Lock Connector Kit . . . . . . . . . . . . . .+ $164 Other Table Connectors. . . . . . . . . . . . . quote required Non-Standard Placement. . . . . . . . . . . . quote required Modesty Panel Option: Fabric Mesh The 8" deep Fabric Mesh Modesty Panel consists of fabric stretched over a lightweight frame with an easy-access wire-management pocket. Available as the default Mod esty Panel option with rectangle Training Tables in lengths ranging from 42" to 96". Finished in 300 Black. Not available with Folding Training Tables, and Medley Training Tables.

Pricing TP1 Nacre, One Unit Per Table. . . . . . . . . . . . . .+ $686 Other Power/Data . . . . . . . . . . . . . . . . . . quote required Non-Standard Placement. . . . . . . . . . . . quote required Grommet Option: G23 Featured (default) Grommet option includes two 2" x 3.5" G23 Rectangular Grommets with cover, placed 14" apart on center along the back edge of the Table Top. Available in 300 Black only.

G23 Rectangular Grommet with Cover

Fabric Mesh Modesty Panel

60” Unsupported Span with Stiffener

24x84 Top with 54” Stiffener

60” unsupported span

Stiffener

Pricing M42 42” Fabric Mesh Modesty Panel . . . . . . . . .+ $334 M48 48” Fabric Mesh Modesty Panel . . . . . . . . .+ $348 M60 60” Fabric Mesh Modesty Panel . . . . . . . . .+ $372 M72 72" Fabric Mesh Modesty Panel . . . . . . . . .+ $396 M84 84" Fabric Mesh Modesty Panel . . . . . . . . .+ $413 M96 96" Fabric Mesh Modesty Panel . . . . . . . . .+ $434 Other Modesty Panel . . . . . . . . see accessories section

G23 Grommet Standard Placement

G23 Rectangular Grommet

46” Unsupported Span with Stiffeners

14”

36x96 Top with Parallel 45” Stiffeners

46” unsupported span

Stiffeners

Pricing TG2 (2) G23 Rectangular Grommets . . . . . . . . . . .+ $76 Other Grommet(s) . . . . . . . . . . . . . . . . . . quote required Non-Standard Placement. . . . . . . . . . . . quote required

Pricing AXH.STF.45 45"Stiffener..................... $71 AXH.STF.54 54"Stiffener..................... $80

264